ICESH(1)

  NAME
 icesh - control window properties and the IceWM window manager

  SYNOPSIS

icesh OPTIONS|ACTIONS+

  DESCRIPTION
icesh provides two types of commands:

1. Commands to directly interact with icewm:
    These are listed in the section "MANAGER ACTIONS" below. They are easy to use, because they don't require to select one or more windows. For example, "icesh restart" will restart icewm and "icesh clients" lists the applications that are managed by icewm.

2. Commands that operate on a selection of windows:
    See the section "WINDOW ACTIONS" below. For example, "icesh close" is a request to close a window, but which window? Now icesh will turn the mouse pointer into a crosshair. Click on a window and a close request will be sent to that application.

    The power of icesh lies in its ability to programmatically select one or more windows and operate on that selection. This can be used in scripts and in icewm-keys(5) to define your own window management hotkeys. For example, to immediately close all xterm windows do "icesh -c xterm close".

    There are a dozen "SELECT OPTIONS" to select windows. They start with a '-' or a '+'. The '-' starts a new selection, while the '+' adds more windows to an existing selection.

    This selection of windows can be reduced by "FILTER OPTIONS". These remove unwanted windows from the current selection. Multiple filter options can be given. For example, "icesh -c xterm -W this close" will close only those xterms that are shown on the current workspace. The xterms on other workspaces are filtered out by the "-W this" filter option.

There is no limit to the number of commands, selections, filters and actions that you can give to a single icesh command. They are processed and evaluated one by one from left to right. This makes icesh a small declarative programming language. Have a look at some examples near the end of this document.

  OPTIONS
icesh recognizes the following options:

  SELECT OPTIONS
Select options specify the window or windows to which subsequent actions apply. If none is given, but an action does require a window, then a selection crosshair is shown to select the desired window interactively. The manager actions do not require window options.

The following options select one or more client windows. If needed, they can be repeated for successive actions.

-a, -all
    Selects all client windows of the window manager.

-f, -focus, +f, +focus
    Selects the application window that is currently focused. The option with minus sign replaces the existing selection with the focused window. With a plus sign the focused window is added to an existing selection.

+g, +group
    Extend the current selection with client windows that belong to the same application window group.

-r, -root, +r, +root
    Selects the root window. The option with minus sign replaces the existing selection with the root window. With a plus sign the root window is added to an existing selection.

-s, -shown
    Selects all client windows that are on the current workspace.

-t, -top
    Selects all toplevel windows from the display unconditionally. This includes windows that have never been mapped and windows with the override redirect bit set to evade management.

-w, -window, +w, +window WINDOW_ID
    Specifies the identifier of the window, WINDOW_ID, for which the action applies. Special identifiers are root for the root window and focus for the currently focused window. The option with minus sign replaces the existing selection. With a plus sign the window is added to an existing selection.

-x, -xembed
    Selects all windows that are embedded using the XEMBED protocol.

+c, +class CLASS
    Extend the current selection with client windows that have a WM_CLASS property equal to CLASS. This is the resource instance and class name. If CLASS contains a period, only windows with exactly the same WM_CLASS property are matched. If there is no period, windows of the same class and windows of the same instance are selected.

+C, +Class
    Extend the current selection with client windows that have a WM_CLASS property similar to the already selected set of windows.

-D, -Dockapps
    Selects all Dockapp applications that are managed by icewm.

+P, +Pid
    Extend the current selection with client windows that have the same process identifier as one of the selected windows.

-T  Selects the IceWM taskbar.

-A, -Await
    Wait for one or more new client windows to appear and make that the new selection.

  FILTER OPTIONS
The following options filter the currently selected set of windows. If no previous select option was given then a -all option is implicitly assumed to filter all client windows.

-c, -class CLASS
    Filters the set of windows on their WM_CLASS property. This is the resource instance and class name. If CLASS contains a period, only windows with exactly the same WM_CLASS property are matched. If there is no period, windows of the same class and windows of the same instance (aka. -name) are selected.

-l, -last
    Filter clients and keep only the most recent client.

-m, -machine HOST
    Filters clients by host name. Clients with a WM_CLIENT_MACHINE property equal to HOST are selected.

-n, -name NAME
    Filters clients by _NET_WM_NAME or WM_NAME. NAME matches any part of the property value. To match at the beginning use a "^" prefix. To match at the end use a "$" suffix.

-p, -pid PID
    Filters clients by process ID. Clients are selected that have a process ID of PID, when libXRes is at version 1.2, or that have a _NET_WM_PID property equal to PID.

-u, -unmapped
    Filter clients and keep those that are currently not viewable. These are hidden, minimized, rolled-up, or on another workspace.

-v, -viewable
    Filter clients and keep only those that are currently viewable. These clients are mapped on the current workspace.

-k, -kovered
    Filter clients and keep only those that are currently viewable and that are at least partially covered by another viewable window.

-G, -Gravity GRAVITY
    Filters clients by the window gravity field of the WM_NORMAL_HINTS property. Clients with a gravity equal to GRAVITY are selected. If GRAVITY starts with an exclamation mark then the filtering is inverted.

-L, -Layer LAYER
    Filters clients by GNOME window layer, which can either be a layer name or a layer number. See EXPRESSIONS below. If LAYER starts with an exclamation mark then the filtering is inverted.

-N, -Netstate STATE
    Filters clients by EWMH window state. Clients that have at least an EWMH window state of STATE are selected. This state refers to details like MINIZED or MAXIMIZED. See EXPRESSIONS below. If STATE starts with an exclamation mark then the filtering is inverted. A question mark "?" filters clients with any bit set in STATE.

-P, -Property PROP[=value]
    Filters clients by property. Clients that have a property PROP are selected. If the optional value is given, the match succeeds only if PROP is a string, window, cardinal, or atom, with a value equal to value. The filtering is inverted if PROP starts with an exclamation mark.

-R, -Role ROLE
    Filters clients by WM_WINDOW_ROLE. Clients that have a WM_WINDOW_ROLE property value equal to ROLE are selected. The filtering is inverted if ROLE starts with an exclamation mark.

-W, -Workspace WORKSPACE
    Filter clients by workspace. Workspace WORKSPACE is either a workspace name, or a workspace number counting from zero, or the word "this" for the current workspace, or the word "All" for all workspaces. If WORKSPACE starts with an exclamation mark then the filtering is inverted.

-X, -Xinerama MONITOR
    Limit clients by RandR/Xinerama monitor. Only operate on clients that are displayed on MONITOR, where MONITOR can be "All" for all monitors, "this" for the monitor where the active window is displayed, or a monitor number starting from zero. See the output of "randr" or "xinerama" below.

-Z, -Zerminal
    Keep only terminals: clients that have forked a shell.

  GENERAL OPTIONS
The following options are identical for every IceWM command.

-d, -display DISPLAY
    Specifies the X11 DISPLAY. If unspecified, defaults to $DISPLAY.

-h, --help
    Print a brief usage statement to stdout and exit.

-V, --version
    Print the program version to stdout and exit.

-C, --copying
    Print copying permissions to stdout for the program and exit.

-q, --quiet
    Don't complain if no matching windows could be found.

  ACTIONS
icesh expects one or more action arguments. There are two kinds of actions: window actions and manager actions. The first operates on the selected windows. The second directly interacts with the icewm window manager.

  WINDOW ACTIONS
The following actions affect the selected window or windows.

activate
    Activate the window, aka. to focus.

close
    Send a close request to the client that created the window.

kill
    Force an immediate close down of the client that created the window.

id  Print window identifiers for the selected windows.

pid Print process identifiers for the selected windows.

list
    Show window details, like geometry and names.

lower
    Lower the window.

raise
    Raise the window.

above
    Stack the window above others.

below
    Stack the window below others.

rollup
    Rollup the specified window.

fullscreen
    Set the window to fullscreen.

maximize
    Maximize the window.

horizontal
    Maximize the window only horizontally.

vertical
    Maximize the window only vertically.

minimize
    Minimize the window.

restore
    Restore the window to normal and clear urgency.

hide
    Hide the window.

unhide
    Reveal the window.

skip
    Don't show the window on the taskbar.

unskip
    Do show the window on the taskbar.

sticky
    Show the window on all workspaces.

unsticky
    Show the window on just one workspace.

urgent
    Set the urgency flag to flash the task button.

resize WIDTH HEIGHT
    Resize window to WIDTH by HEIGHT window units. For text based applications like terminals, a window unit is the size of a single character cell.

sizeto WIDTH HEIGHT
    Resize window to WIDTH by HEIGHT pixels. If WIDTH or HEIGHT ends with a percent sign "%", then they refer to a percentage of the desktop work area. For instance, "sizeto 50% 100%" resizes to half the desktop width and whatever height is available above or below the taskbar.

sizeby WIDTH HEIGHT
    Resize window by WIDTH by HEIGHT pixels. If WIDTH or HEIGHT ends with a percent sign "%", then they refer to a percentage of the current window size. For instance, "sizeby 50% 200" increases the width by 50% and increases the height by 200 pixels.

move X Y
    Move the selected window or windows to the screen position X Y. To specify X or Y values relative to the right side or bottom side precede the value with an extra minus sign, like in "move -+10 --20". When X or Y end with a percent sign "%", they refer to a percentage of the desktop work area.

moveby X Y
    Displace window by X Y pixels.

center
    Position the window in the center of the desktop work area.

left
    Position the window against the left side of the desktop work area.

right
    Position the window against the right side of the desktop work area.

top Position the window against the top side of the desktop work area.

bottom
    Position the window against the bottom side of the desktop work area.

setIconTitle TITLE
    Set the icon title to TITLE.

getIconTitle
    Print the icon title.

setWindowTitle TITLE
    Set the window title to TITLE.

getWindowTitle
    Print the window title.

setGeometry GEOMETRY
    Set the window geometry to GEOMETRY. This geometry should be specified in a format that can be parsed by XParseGeometry(3). Negative offsets are with respect to the bottom or right side of the screen. Use "+-" for a truly negative position.

getGeometry
    Print the window geometry.

setClass CLASS
    Set the resource name and class to CLASS, which should be a resource name and a resource class connected by a dot. To preserve either the existing name or class, use a percentage sign for that part.

getClass
    Print the resource name and class.

netState [STATE]
    If STATE is omitted then it shows the EWMH window state. If STATE starts with a "+" then flags in STATE are appended to the existing EWMH window state. If STATE starts with a "-" then flags in STATE are removed from the existing EWMH window state. If STATE starts with a "^" then flags in STATE are toggled with respect to the existing EWMH window state. If STATE starts with a "=" then the EWMH window state is set to STATE. See EXPRESSIONS below. A list of EWMH flags can be found in the output of "icesh symbols".

setLayer LAYER
    Move the specified window to another window layer. See EXPRESSIONS below for a list of LAYER symbols.

getLayer
    Print the window layer for the specified window.

setWorkspace WORKSPACE
    Move the specified window to another workspace. Select the root window to change the current workspace. If WORKSPACE is "All" then the specified window becomes visible on all workspaces. Specify "this" for the current workspace, "next" for the subsequent workspace or "prev" for the preceding workspace.

getWorkspace
    Print the workspace for the specified window.

opacity [OPACITY]
    Print the window opacity if OPACITY is not given, otherwise set the window opacity to OPACITY.

setTrayOption TRAYOPTION
    Set the IceWM tray option for the specified window to TRAYOPTION. See IceWM tray options, below, for TRAYOPTION symbols.

getTrayOption
    Print the IceWM tray option for the specified window.

setNormalGravity GRAVITY
    Set the window gravity field in the WM_NORMAL_HINTS property for the specified window to GRAVITY. See below for GRAVITY symbols.

getNormalGravity
    Print the window gravity from the WM_NORMAL_HINTS property for the specified window.

setWindowGravity GRAVITY
    Set the window gravity for the specified window to GRAVITY. See below for GRAVITY symbols.

getWindowGravity
    Print the window gravity for the specified window.

setBitGravity GRAVITY
    Set the bit gravity> for the specified window to GRAVITY. See below for GRAVITY symbols.

getBitGravity
    Print the bit gravity for the specified window.

motif [funcs FUNCTIONS | decor DECORATIONS | remove]
    Query, set or modify the "_MOTIF_WM_HINTS" property for the specified window. Without arguments motif will show the current value, but only if the window has such a property. The property can be removed or reset with the remove argument. With funcs and decor individual fields of this property can be enabled or disabled. If FUNCTIONS or DECORATIONS starts with a minus or plus sign then the existing value is modified, otherwise it is set to the new value. Note that if "All" is set, other set fields are disabled and cleared fields are enabled.

borderless
    Hide the frame borders and title.

bordered
    Show the frame borders and title.

denormal
    Remove the WM_NORMAL_HINTS property, if it exists. This lifts font-size restrictions on resizing, especially for terminals.

prop PROPERTY
    Print the value of property PROPERTY, if it is present.

properties
    Print all properties and their values.

frame
    Print the identifier of the window frame.

extents
    Print the window identifier and the frame border sizes: left, right, top and bottom.

focusmodel
    Print the ICCCM focus model as advertised by the client window. This is either Locally, Passive, Globally or NoInput.

override [0|1]
    Print the override redirect status for the window, or if either 0 or 1 is given, then disable or enable the override redirect status.

tabto label
    Move the windows as tabs to a frame that has "frame" label label. Such a frame is created if needed.

untab
    Move each window to its own frame, if it is currently tabbed.

loadicon image.pam
    Load an icon from file, which must be in the PAM image format, with dimensions at most 256, a depth of 4, and type RGB_ALPHA.

saveicon file000.pam
    Save an icon to a new file in the PAM image format. Digits are increased to generate a unique new filename for each window. The window must have a _NET_WM_ICON property.

usertime
    Show the time of last user interaction in milliseconds.

click window-x window-y button
    Send a button press and release event at position (window-x, window-y). A negative position is relative to the bottom right corner. The mouse pointer is warped to the position before sending the events. The button number should be between 1 and 5 inclusive.

monitors top bottom left right
    This sets the monitors to use for fullscreen. Top, bottom, left, and right are indices of the icesh xinerama command.

spy Observe the selected windows and report any changes. This includes focus, visibility, position, size and all window properties. To monitor all of the protocol request messages that client applications may send to icewm, also spy on the root window.

stacking
    Sort the list of windows from topmost to bottom-most.

reverse
    Reverse the order of the list of windows.

switchmenu
    Output the list as a menu for icewm's QuickSwitch. This action is to be used in a switchkey directive in the "keys" file.

print format
    For each window in the selection, print a line according to format. Here common backslash-escapes are recognized as well as the following percent formatting options:

    %   A literal percent sign.

    h   The window height.

    w   The window width.

    x   The window x-position.

    y   The window y-position.

    g   The window geometry.

    i   The window identifying handle.

    o   An icon name.

    p   The process-ID of the window application.

    c   The WM_CLASS property of the window.

    m   The WM_CLIENT_MACHINE property of the window.

    t   The window title.

    W   The current workspace of the window.

    Each percent format option may start with a minus sign for left-alignment and have a numeric field width.

  MANAGER ACTIONS
The following actions control the IceWM window manager and therefore do not require a window select or filter option:

listWorkspaces
    List the names of all workspaces.

current
    Show the number and name of the current workspace.

goto WORKSPACE
    Change the current workspace to WORKSPACE. Specify "next" for the subsequent workspace or "prev" for the preceding workspace.

workspaces [COUNT]
    Print the number of workspaces if COUNT is not given, otherwise set the number of workspaces to COUNT.

getWorkspaceName INDEX
    Print the name of workspace INDEX, where INDEX is a workspace number starting from zero.

getWorkspaceNames
    Print the name of all workspaces, one per line of output.

setWorkspaceName INDEX NAME
    Change the name of the workspace INDEX to NAME, where INDEX is a workspace number starting from zero.

setWorkspaceNames NAME [NAME]*
    Change the workspace names to the list of NAMEs.

addWorkspace NAME
    Create a new workspace with name NAME.

desktop [SHOWING]
    If SHOWING is 1 then set "showing the desktop" mode. If SHOWING is 0 then turn off "showing the desktop". Print the current mode if SHOWING is not given.

workarea
    Print the dimensions of the work area for the current workspace. This is the desktop, but minus space occupied by dock and panel windows.

randr
    Summarize the RandR configuration.

xinerama
    Summarize the Xinerama configuration.

check
    Print information about the current window manager, like name, version, class, locale, command, host name and pid.

clients
    List all managed client windows, their titles and geometries.

shown
    List all mapped client windows for the current desktop, their titles and geometries.

windows
    List all toplevel windows, their titles and geometries.

systray
    List applications that are managed by the IceWM system tray.

xembed
    List application windows that are embedded using the XEMBED protocol. This is another way to discover system tray applications.

logout
    Let icewm execute the "LogoutCommand".

reboot
    Let icewm execute the "RebootCommand".

shutdown
    Let icewm execute the "ShutdownCommand".

cancel
    Let icewm cancel the logout/reboot/shutdown.

about
    Let icewm show the about window.

windowlist
    Let icewm show the window list window.

restart
    Let icewm restart itself.

suspend
    Let icewm execute the "SuspendCommand".

hibernate
    Let icewm execute the "HibernateCommand".

winoptions
    Let icewm reload the "winoptions". This only affects new windows.

keys
    Let icewm reload the "keys" file.

toolbar
    Let icewm reload the "toolbar" file.

refresh
    Let icewm refresh the desktop background.

guievents
    Monitor the ICEWM_GUI_EVENT property and report all changes. Hit "Ctrl+C" to abort this and continue with the next command.

delay [time]
    Stop execution for time or 0.1 seconds.

runonce program [arguments...]
    This action is meant to be used together with the -class option. Only if no window is matched by WM_CLASS then program [arguments...] is executed.

loop [count]
    Loop back to the beginning of the command and repeat. The optional count limits the number of repetitions.

pick
    Choose a window by a mouse button click.

x11time
    Show the current X11 server time in milliseconds.

sync
    Synchronize with the IceWM window manager. That is, wait for icewm to process all previous actions.

symbols
    List all named symbols.

  CONDITIONALS
Icesh supports "if-then-else" expressions. The full syntax is:

    if selection
    then
        actions
    elif selection
    then
        actions
    else
        actions
    end

Where "selection" is a sequence of selection and filtering options, which evaluates to true when it is non-empty. That is, if one or more windows fulfilled the condition. If it is empty, then its "actions" clause is ignored and the subsequent "elif" or "else" clause is tried or taken. Each clause is optional.

Whenever a selection condition evaluates to false, the window selection that existed before the "if" clause is immediately restored. This also happens after an "end" clause.

  EXPRESSIONS
Some of the window actions require one or two EXPRESSION arguments.

EXPRESSION ::= SYMBOL | EXPRESSION { "+" | "|" | "-" } SYMBOL

This says that an expression is either a SYMBOL or an expression which is combined with an operator to a SYMBOL. In other words, an expression is a sequence of symbols, which are combined using operators, where an operator may be a plus, a vertical bar or a minus.

Each SYMBOL may be either a number or a named symbol from one of the following applicable domains, depending upon the context in which it is used:

Window layer
    Named symbols of the domain Window layer (numeric range: 0-15):

        Desktop                (0)
        Below                  (2)
        Normal                 (4)
        OnTop                  (6)
        Dock                   (8)
        AboveDock             (10)
        Menu                  (12)
        Fullscreen            (14)
        AboveAll              (15)

    These symbols are used with the LAYER argument to the "setLayer" action.

IceWM tray option
    Named symbols of the domain IceWM tray option (numeric range: 0-2):

        Ignore                 (0)
        Minimized              (1)
        Exclusive              (2)

    These symbols are used with the TRAYOPTION argument to the "setTrayOption" action.

Gravity symbols
    Named symbols for window and bit gravity (numeric range: 0-10):

        ForgetGravity         (0)
        NorthWestGravity      (1)
        NorthGravity          (2)
        NorthEastGravity      (3)
        WestGravity           (4)
        CenterGravity         (5)
        EastGravity           (6)
        SouthWestGravity      (7)
        SouthGravity          (8)
        SouthEastGravity      (9)
        StaticGravity         (10)

Motif functions
        All                  (1)
        Resize               (2)
        Move                 (4)
        Minimize             (8)
        Maximize             (16)
        Close                (32)

Motif decorations
        All                  (1)
        Border               (2)
        Resize               (4)
        Title                (8)
        Menu                 (16)
        Minimize             (32)
        Maximize             (64)

EWMH window state symbols
    Named symbols of the domain EWMH state (numeric range: 0-8191):

        ABOVE                 (1)
        BELOW                 (2)
        DEMANDS_ATTENTION     (4)
        FOCUSED               (8)
        FULLSCREEN            (16)
        HIDDEN                (32)
        MAXIMIZED_HORZ        (64)
        MAXIMIZED_VERT        (128)
        MODAL                 (256)
        SHADED                (512)
        SKIP_PAGER            (1024)
        SKIP_TASKBAR          (2048)
        STICKY                (4096)

  EXAMPLES
List all workspace names:

    icesh listWorkspaces

Example output:

    workspace #0: `main'
    workspace #1: `web'
    workspace #2: `doc'
    workspace #3: `dev'

Close terminal work and activate terminal fun.

    icesh -c work.XTerm close -a -c fun.XTerm activate

Print opacity for all xterms.

    icesh -c XTerm opacity

Change opacity for all xterms.

    icesh -c XTerm opacity 84

Move all windows on workspace "Top" to the current workspace.

    icesh -W "Top" setWorkspace "this"

Restore all hidden clients, minimize all clients on the current workspace and activate Firefox.

    icesh -N HIDDEN restore -a -W "this" minimize -a -c Firefox activate

Resize the focused window to occupy the right half of the desktop area.

    icesh -f sizeto 49% 100% top right raise

Toggle the frame border of the focused window.

    if icesh -f motif | grep -q 'decor:$'; then \
        icesh -f motif decor All; else icesh -f motif decor ""; fi

Here is a different solution using conditionals.

    icesh -f if -P _NET_FRAME_EXTENTS=0 then bordered else borderless

Here is a conditional to either toggle the visibility of a roxterm that has a WM_WINDOW_ROLE value of "special" or start it with runonce.

    icesh if -c roxterm.Roxterm -R special then \
        if -v then hide \
        elif -u then setWorkspace this activate end \
        else runonce roxterm --role=special

Collect all urxvt terminals from the fourth workspace in a single frame on the current workspace.

    icesh -W 3 -c urxvt tabto myfunnyname

Use the loop construct conditionally to wait for a certain window to appear.

    icesh -t if -n Tooltip then list else delay 0.05 loop end

  ENVIRONMENT

DISPLAY
    The default display.

  EXIT STATUS

0   The last action completed successfully.

1   The last action completed unsuccessfully, or no window met the condition.

2   A conditional has invalid syntax.

3   The display could not be opened.

4   The X server reports an error while processing a request.

  COMPLIANCE
icesh is largely compliant with the EWMH and ICCCM specifications. Some commands, like manager actions, are specific to IceWM.

  SEE ALSO
icewm(1), wmctrl(1), xdotool(1), xprop(1), xwininfo(1), XParseGeometry(3).

  BUGS
Please report bugs at <https://github.com/ice-wm/icewm/issues>.

  AUTHOR
Brian Bidulock <mailto:bidulock@openss7.org>.

See --copying for full copyright notice and copying permissions.

  LICENSE
IceWM is licensed under the GNU Library General Public License. See the COPYING file in the distribution or use the --copying flag to display copying permissions.